Oven Repair in Coeur d'Alene, ID

If you smell gas, Avista's instruction is to “Move everyone upwind” and, “From a safe distance, call 911 and then Avista.” A pilot light that will not light but still emits gas is on the list of leak signs. Never use the oven to heat a room; the utility lists the stove as a common source of carbon monoxide.

With no smell, the ignition type determines the next step. If the oven has a standing pilot and gas was shut off at the meter for the move, an unlit pilot is the first thing to rule out. For that relight, Avista's rule for its Idaho and Washington customers is to call a contractor. An oven with electronic ignition has no pilot to relight; if it still will not light even after the gas is back on at the meter, it may need a repair visit. The parts behind a cold oven are covered at Oven Repair.

The other common reason for a cold gas oven is meter work. Avista tests meters selected at random, tells those customers in advance, and turns service off temporarily during the test. Its representative checks and relights the appliances afterward, so ask for the oven to be included before the representative leaves. A meter replacement is scheduled in advance, and the instruction for that visit is clear: “Do not attempt to relight your natural gas equipment yourself.”

If an appliance was recently working and you are unsure why it stopped, Avista asks for a call. It may be able to relight the pilot if that is safe; if it cannot, it says to contact a third-party contractor. Once the representative has been and gone and the oven burner still stays dark, or lights and then goes out, the trouble is most likely in the oven itself.

GE Appliances' support page for a gas oven that will not come on lists checks an owner can make without opening anything:

A cold electric oven falls outside the gas questions entirely. Once a look at the panel shows its breaker has not tripped, it is a repair call from the start.

Tenants should tell the landlord or property manager first. SD Appliance accepts work orders from property managers and individual landlords, and a work order that carries the tenant's details means the tenant is contacted directly to arrange access. Where a management account has a pre-authorization in place, work under the agreed limit proceeds without an approval call. Each job produces a receipt for the owner's records, and when there is no obvious physical damage, the owner is also informed of the cause. The rest of the rental process is at Property Management Appliance Repair.

Say whether the oven is gas or electric, built-in or part of a range, and whether the house is newly occupied or has had meter work lately. For a gas oven, whether it lights slowly, lights and goes out, or stays dark narrows what gets looked at first, and so does whether you hear clicking or see a glow through the slots in the oven floor. If a representative has already been out, say what was relit.

At the oven, the question after a move or meter work is whether gas is reaching the igniter at all. If it stops short of the oven, that finding goes to the gas company or, if the fault is in the house piping, to a plumber or heating dealer. If gas arrives and the burner still will not light, the fault is in the oven's own ignition.

The service call is $89. It covers travel, inspection, and diagnostic time. It goes toward the repair if you go ahead, and it stands on its own if you decide not to.

Parts and labor are warranted for 30 to 90 days as stated on your invoice, with the full terms at Warranty.

Zero-interest financing through Wisetack is available on repairs over $500 for eligible customers, and active-duty service members and veterans get 15% off labor. Terms are at Financing.

Request a Repair